When ordering a 64T38 or 89T38 retrac button bit, the diameter and thread are only the starting point. Two bits with the same diameter and T38 thread can have different skirt profiles. If you are replacing a bit that works well, matching the skirt is part of matching the bit.
A standard button bit has a conventional rear body, while a retrac bit has a skirt shaped to assist withdrawal. Within the retrac family, the ribs can be short, straight, interrupted, or helical, and the channels between them can vary in width.
Five Retrac Skirt Designs
To identify a skirt design, look at the length of the ribs, the direction they run, and the spacing between them. A side view shows the rib shape; a rear view shows the channel openings around the threaded socket.

01. Compact Retrac Skirt with Short Ribs
The skirt has a compact profile with short ribs. In the side view, look at how far the ribs extend along the body.

02. Retrac Skirt with Standard Straight Ribs
The ribs run parallel to the bit axis. Here, “standard” refers to the straight-rib pattern on a retrac skirt.

03. Retrac Skirt with Wide Channels
The ribs also run straight, but the channels between them are wider. The rear view makes the extra space around the threaded opening easier to see.

04. Retrac Skirt with Helical Ribs
The ribs wrap around the skirt as they extend toward the rear of the bit. Follow a single rib in the side view to see the spiral.

05. Retrac Skirt with Interrupted Straight Ribs and Angled Ends
The main sections of the ribs run straight along the skirt. Breaks and angled ends distinguish this design from a continuous straight rib, while its straight main sections distinguish it from a helical rib.
These images illustrate skirt geometry. Confirm dimensions, carbide button layout, and flushing holes against the product drawing.
Standard Straight Ribs vs. Wide Channels: Which Should You Choose?
V.S.
Standard straight-rib retrac skirt (left) and wide-channel retrac skirt (right).
Both designs have straight ribs. The key difference is channel width: the wide-channel skirt leaves more space between the ribs. That difference is worth looking at when cuttings repeatedly collect around the bit. The effect also depends on the flushing holes and how cuttings move from the bit face into the skirt channels.
| What happens on site? | Which design should you consider? |
|---|---|
| The current straight-rib bit clears cuttings and withdraws smoothly. | Match the existing skirt and flushing layout. Use a side or rear photo to confirm the profile before ordering. |
| Cuttings repeatedly build up around the bit. | Consider the wide-channel design. Compare the channel openings and check how they connect to the flushing path from the bit face. |
| The bit hangs up during withdrawal after loose rock falls into the hole. | Compare the rear skirt profile and the shape of the rib ends. Wider channels alone do not tell you which bit will withdraw more easily. |
If you are considering a change, tell your supplier when the problem occurs: while drilling, when cuttings stop clearing, or when pulling the bit out. That detail helps determine whether to focus on the flushing layout or the rear skirt.
T38 Retrac Configuration Examples
| Model | Nominal Diameter | Body Style | Face Buttons | Gauge Buttons |
|---|---|---|---|---|
| 64T38 Retrac | 64 mm | Retrac | 3 × Ø11 mm | 6 × Ø11 mm |
| 89T38 Retrac | 89 mm | Retrac | 5 × Ø12 mm | 8 × Ø12 mm |
These are two specific configurations. 64T38 and 89T38 identify the diameter and thread; they do not identify which of the five illustrated skirt designs the bit uses. Confirm the skirt profile and button layout separately.
Request a Quote
For a 64T38 Retrac, 89T38 Retrac, or another threaded button bit, send Qstone the bit diameter, thread, rock conditions, and order quantity. If one of the five skirt profiles matches what you need, include the figure number.
For a replacement, send front, side, and rear photos of your current bit and tell us whether the main issue is wear, cuttings removal, or withdrawal.
Email: info@q-stones.com
![]() | ![]() | ![]() | ![]() |
| Button Bits | Drill rod | Coupling Sleeves | Shank adapter |

English
عربي
Deutsch
Русский язык
Français
Nederlands
Português
日本語
Español
Italiano




